WEEK 13

Thurday 16th, We started with the English class. Where we have done some exercises and review what we will have to present next week, which is an interview between two people. After this class, we have shown the final project to the teacher and he passed us the checklist, and he has put everything ok. Then some of us have set out to go over the robot for tomorrow's exam, while the others have done the same with the camera. We think we're pretty well prepared for our last exam of the course

Friday 17th, Today we have to do the individual tests, we will do them in two shifts, first will the people who have to go to dual in the afternoon. The examination consists of positioning the robot at one point, after putting the robot at that point take it to the ramp and there take the piece and take it to the cnc point. Then from the cnc point you will have to move the part to the paint point. from the paint point we will take it to the drying point and thus finally finish the process. in the theoretical part we will have to answer a few questions about robots and vision exercises.

Monday 20, Today we have present all the project in groups and our project is about ABB ROBOT. We present our presentation in front of the classmates and in front of the teacher, Jon. Our ABB ROBOT is very good programmed so we think that we have to have a good mark on the task. Apart from that, with Garazi we have started doing some different things. For example, we have done a balance about our company and how many products  we have sold. With Garazi, we have worked Xabier and Aritz, because Unai, Adrian and Soto have validated. Our product is called LLAVBIERTO.

Tuesday 21 and Wednesday 22, we have started with the new project, it is the last of the course, and we also have the luck that in this project we do not have to do individual test. Honestly, we think it's the worst and the most boring challenge, because there are so many broken and damaged things. Still, we don't know very well where to start or much less to do, however we are asking for help from the previous groups. Tomorrow we'll start programming the model.